Dig in tight quarters with minimum soil compaction with a Case IH BHX Series utility backhoe. One person can easily attach and remove the backhoe. The sub-frame remains attached to the backhoe and the three-point lift arms stay on the tractor.

All controls are mounted in a low-profile console that doesn't block your view.

Two-lever wobble stick controls boom, dipper stick, bucket and swing for easy operation.

Select from a complete range of buckets to suit every digging operation.

The two largest models—the BHX1102 and BHX1114—feature a reinforced boom, dipper, swing frame, sub-frame and stabilizers, improving digging forces up to 30%.

You'll easily move or level sand, dirt, snow and gravel with a BMX Series Quick-Attach front blade from Case IH. Choose from four sizes: 54, 60, 72 or 84 inches (137, 152, 183, 213 cm).

The convenient Quick-Attach sub-frame makes it easy to attach and remove the blade without tools. The sub-frame can also be used with other Case IH front-mounted Quick-Attach implements, including front rotary brooms and snow blowers.

Durable, cutting edge is made of heat-treated, high-carbon steel. It's replaceable and reversible and bolts on for long life and easy maintenance. Rubber cutting edges are available for delicate work with the 60- and 72-inch (152- and 183-cm) blades.

Moldboards are reinforced on the 60-, 72- and 84-inch (152-, 183- and 213-cm) blades to prevent bending under hard working conditions

A single-lever joystick control is easy to reach to raise or lower the blade and to adjust blade angle.

Hydraulic blade angling (manual adjustment on the 54-inch model) allows you to adjust the blade up to 30 degrees to deliver material to the right or the left.

Durable, adjustable, spring-trip design allows the blade to pivot when it hits any obstruction.

Adjustable skid shoes maintain blade at preset height to prevent gouging.

* Requires a tractor equipped with a two-spool hydraulic valve with single-lever joystick control.

Add the BMX184 front blade to your DX48 or DX55 utility tractor and you get the pushing power to easily move snow, sand, gravel, dirt or manure. The up-front position of the blade makes it easy to see and manage the load while dozing

An easy-to use, single-lever joystick control allows you to hydraulically raise and lower the blade and adjust blade angle up to 30 degrees, allowing you to deliver material to the right or left side.

Adjustable skid shoes maintain blade at the preset height to prevent gouging.

Durable cutting edge is made of heat-treated, high-carbon steel. It's replaceable and reversible and bolts on for long life and easy maintenance.

* Requires a tractor equipped with a two-spool hydraulic valve with single-lever joystick control.
 

These convenient Quick-Attach mower decks can be attached and removed in minutes without tools, allowing you to quickly move from job to job. Two cutting widths are available—54- and 60-inch (137- and 152-cm). Both discharge grass clippings to the side or can be used with an optional grass catcher.

Mowing height adjusts from one to five inches (2.5 to 12.7 cm). Height increments are clearly marked on the height selection lever located to the left of your seat. While seated, simply move the lever to your desired cutting height and lower the deck.

Free-floating, four-bar linkage allows the mower to move up and down to follow ground contours.

Blades spin at up to 15,452 fpm (4,710 mpm) for smooth, efficient cutting action.

Automatic belt tensioning system ensures smooth operation and eliminates the need to manually tighten belts.

Stamped steel mower deck construction stands up to many seasons of use.