BHX Series Utility Backhoes

Dig in tight quarters with minimum soil compaction with a Case IH BHX Series utility backhoe. One person can easily attach and remove the backhoe. The sub-frame remains attached to the backhoe and the three-point lift arms stay on the tractor.

All controls are mounted in a low-profile console that doesn't block your view.

Two-lever wobble stick controls boom, dipper stick, bucket and swing for easy operation.

Select from a complete range of buckets to suit every digging operation.

The two largest models—the BHX1102 and BHX1114—feature a reinforced boom, dipper, swing frame, sub-frame and stabilizers, improving digging forces up to 30%.

BMX Series Quick-Attach Front Blades*

You'll easily move or level sand, dirt, snow and gravel with a BMX Series Quick-Attach front blade from Case IH. Choose from four sizes: 54, 60, 72 or 84 inches (137, 152, 183, 213 cm).

The convenient Quick-Attach sub-frame makes it easy to attach and remove the blade without tools. The sub-frame can also be used with other Case IH front-mounted Quick-Attach implements, including front rotary brooms and snow blowers.

Durable, cutting edge is made of heat-treated, high-carbon steel. It's replaceable and reversible and bolts on for long life and easy maintenance. Rubber cutting edges are available for delicate work with the 60- and 72-inch (152- and 183-cm) blades.

Moldboards are reinforced on the 60-, 72- and 84-inch (152-, 183- and 213-cm) blades to prevent bending under hard working conditions

A single-lever joystick control is easy to reach to raise or lower the blade and to adjust blade angle.

Hydraulic blade angling (manual adjustment on the 54-inch model) allows you to adjust the blade up to 30 degrees to deliver material to the right or the left.

Durable, adjustable, spring-trip design allows the blade to pivot when it hits any obstruction.

Adjustable skid shoes maintain blade at preset height to prevent gouging.

* Requires a tractor equipped with a two-spool hydraulic valve with single-lever joystick control.

BMX184 Front Blade* for Farmall® Utility Tractors

Add the BMX184 front blade to your DX48 or DX55 utility tractor and you get the pushing power to easily move snow, sand, gravel, dirt or manure. The up-front position of the blade makes it easy to see and manage the load while dozing

An easy-to use, single-lever joystick control allows you to hydraulically raise and lower the blade and adjust blade angle up to 30 degrees, allowing you to deliver material to the right or left side.

Adjustable skid shoes maintain blade at the preset height to prevent gouging.

Durable cutting edge is made of heat-treated, high-carbon steel. It's replaceable and reversible and bolts on for long life and easy maintenance.

* Requires a tractor equipped with a two-spool hydraulic valve with single-lever joystick control.
 

These convenient Quick-Attach mower decks can be attached and removed in minutes without tools, allowing you to quickly move from job to job. Two cutting widths are available—54- and 60-inch (137- and 152-cm). Both discharge grass clippings to the side or can be used with an optional grass catcher.

Mowing height adjusts from one to five inches (2.5 to 12.7 cm). Height increments are clearly marked on the height selection lever located to the left of your seat. While seated, simply move the lever to your desired cutting height and lower the deck.

Free-floating, four-bar linkage allows the mower to move up and down to follow ground contours.

Blades spin at up to 15,452 fpm (4,710 mpm) for smooth, efficient cutting action.

Automatic belt tensioning system ensures smooth operation and eliminates the need to manually tighten belts.

Stamped steel mower deck construction stands up to many seasons of use.

Keep lawns looking their best with a mid-mount mower from Case IH. Select from four cutting widths—54, 60, 72 and 84 inches (137, 152, 183, 213 cm). All mowers are compatible with Case IH loaders so there's no need to remove the mower when switching to loader work.

Mid-mounting makes it easy to keep an eye on the mower when maneuvering next to buildings or landscaped beds. Mid-mounting also frees up the three-point hitch, allowing you to move quickly between chores, without the need to remove the mower deck.

Choose side- or rear-discharge on the 60- and 72-inch (152- and 183-cm) models. The 54-inch (137-cm) model is side discharge only, while the 84-inch (213-cm) model is rear discharge only.

Routine maintenance is easy because spindles can be greased from the top of the mower deck without removing the shields.

Overlapping, high-lift blades deliver outstanding cutting and mulching performance.

Rugged construction stands up to many seasons of use.

84-inch (213-cm) mid-mount rear-discharge deck is the widest mid-mount deck in the industry.

• Designed exclusively for the DX35, DX40, DX45 Farmall® Compact tractors, this model makes efficient use of available power while covering the wheel tracks regardless of tire combination.
• Four GATOR MULCHER™ blades use a four-tooth blade design to provide outstanding mulching and cut quality. The four-blade design delivers a best-in-class blade overlap of one and a half inches.

* Available for tractor models equipped with mid PTO.

You'll cut your acreage down to size in short order with a Case IH RRX Series rear-mount finishing mower.  Three-point mounting makes it easy to change between mowing jobs to other chores.

A strong 40-hp (53.6-kW) gearbox teams with your tractor's 540-rpm PTO to handle the stress of continuous mowing. Shaft drive transfers power smoothly from tractor to gearbox.

Three overlapping mower blades provide fast smooth mowing action.

The air-tunnel design improves the quality of cut and materials discharge to allow for smooth cutting, even in tall grass.

Gauge wheels allow you to adjust cutting height and allow the mower deck to follow ground contours for an even cut and reduced scalping.

Floating top link offers additional flex that helps follow the ground through dips and over humps.

Greasable spindles provide trouble-free performance.

Automatic belt-tensioning system maintains correct adjustment for a longer life.

Optional foam-filled tires are available.

Perfect for preparing seedbeds or controlling weeds, Case IH TLX Series rotary tillers are durable machines designed to provide years of service.

• 1/8-inch (3.2-mm) thick steel deck construction provides built-in strength.
• Box section steel frame supports the Category I or II depending on the model.
• Oil-bath input and side gearboxes assure smooth, efficient, power transmission and superior durability.
• Driveline universal joints and rotor shaft bearing have greased fittings for longer life.

Adjustable skid-shoes allow you to change tilling depth.

Adjustable rear shield allows you to adjust between fine and coarse tilling.

Accommodate for offset operation—like tilling close to a building or obstacle—by adjusting the outside hitch pin brackets which are bolted to the frame.

Heavy-duty (H) models offer these added features:

• High speed tines - greater tip speed allows for one-pass tilling.
• Gear drive - reliable performance in difficult conditions.
• Curved-tip steel tiller tines - optimum soil mixing performance.

Sweep driveways and parking areas clear of debris, leaves, grass clippings, gravel, or snow with a Case IH BRX Series rotary broom.

The convenient Quick-Attach sub-frame makes it easy to attach and remove the broom without tools. The sub-frame can also be used with other Case IH front-mounted Quick-Attach implements including front blades and snow blowers.

Break through big snow drifts with a BSX Series Quick-Attach front snow blower from Case IH. With the snow blower located directly in front of you, your visibility to the work area is excellent.

The convenient Quick-Attach sub-frame makes it easy to attach and remove the snow blower without tools. The sub-frame can also be used with other Case IH front-mounted Quick-Attach implements including front blades and rotary brooms.

Two-stage snow blower design allows you to throw and clear many types of snow, from light and fluffy to wet or hard-packed.

The open-design auger prevents wet snow from building up and helps break up hard-packed snow.

High-speed blower fan uses three or four blades for maximum efficiency.

High-carbon, heavy-duty, adjustable skid shoes allow you to change the height of the snow blower to match conditions.

When the snow piles up high, hook up to a Case IH BSX Series rear-mounted snow blower to quickly clear driveways, sidewalks or parking lots.

Two-stage design allows you to clear many types of snow, from light and fluffy to wet or hard-packed.

The open design of the auger prevents wet snow from building up and helps break up hard-packed snow.

High-speed blower fan uses four blades for maximum efficiency.

High-carbon, heavy-duty, adjustable skid shoes allow you to vary settings for efficient operation in changing conditions.

Adjust the two-part chute with your choice of manual or hydraulic rotation. Hydraulic control allows you to change the direction of blown snow without leaving your tractor seat (a tractor rear remote valve is required).

High-carbon cutting edges are replaceable for long life and easy maintenance.